Beam MG200, User Manual

Page: 102 / 291

MG200 USER MANUAL
102 of 269
©
2019 BEAM
For the WDS Only mode , the MG200 only bridges the connected wired clients to another WDS-enabled Wi-Fi
MG200 which the MG200 has associates with. It means no wireless clients can connect to the MG200 while WDS
Only Mode is selected and enabled.
WDS Only Mode
Item Value setting Description
Green AP
Disabled by
default. Check the Enable box to activate Green AP function.
Time Schedule Mandatory field.
Apply a specific Time Schedule to this rule; otherwise leave it as (0)
Always .
If the dropdown list is empty, ensure Time Schedule is pre-
configured. Refer to User Rule > Scheduling > Configuration tab.
Scan Remote
AP’s MAC List
System data.
Press the Scan button to scan the spatial AP information, and then
select one from the AP list, the MAC of the selected AP will be auto
filled in the following Remote AP MAC table.
Remote AP MAC
1-4
Mandatory field.
Enter the remote AP’s MAC manually, or via auto-scan approach, the
MG200 will bridge the traffic to the remote AP when associates
successfully.