Beam MG200, User Manual

Page: 47 / 291

MG200 USER MANUAL
47 of 269
©
2019 BEAM
2.4 Administration
2.4.1 Remote Management
Navigate to the Status > Administration > Remote Management tab.
The
Remote Management page shows the status for managing remote network MG200s. The type of
management available are SNMP and TR-069. The display will refresh automatically every five seconds.
SNMP Link Status window shows the status of current active SNMP connections.
SNMP Link Status
Item
Value setting Description
User Name
System data.
Displays the username for authentication. This is only available
for SNMP version 3.
IP Address
System data. Displays the IP address of SNMP manager.
Port System data.
Displays the port number which is used to maintain connection
with the SNMP manager.
Community System data. Displays the community for SNMP version 1 or version 2c only.
Auth. Mode
System data. Displays the authentication method for SNMP version 3 only.
Privacy Mode System data. Displays the privacy mode for version 3 only.
SNMP Version
System data. Displays the SNMP version number being used.
The
SNMP Trap Information window shows the trap level, time and trap event.
SNMP Trap Information
Item
Value setting Description
Trap Level System data. Displays the trap level.
Time System data. Displays the timestamp of trap event.
Trap Event
System data. Displays the IP address of the trap sender and event type.