Beam MG200 User Manual Download Page 30

Page: 30 / 291

MG200 USER MANUAL

30 of 269

2019 BEAM

The

3G/4G Modem Status List

show the interface, card information, link status, signal strength and network

name. Click the Detail button for more information.

3G/4G Modem Status List
Item

Value setting

Description

Physical
Interface

System data.

Displays the type of WAN physical interface.

Card
Information

System data.

isplays the vendor’s 3G/4G modem model name.

Link Status

System data.

Displays the 3G/4G connection status. The status can be Connecting,
Connected, Disconnecting, and Disconnected.

Signal
Strength

System data.

Displays the 3G/4G wireless signal level.

Network
Name

System data.

Displays the name of the service network carrier.

Refresh

System data.

Click the

Refresh

button to renew the information.

Action

Button.

This area provides functional buttons.

Detail Button

when press, a window of Modem Information will

appear. They are the Modem Information, SIM Status, and Service
Information, signal Strength / Quality and Error Messages.

Summary of Contents for MG200




































































































































































































































































































Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands

Beam MG200, User Manual

Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands