Beam MG200 User Manual Download Page 124

Page: 124 / 291

MG200 USER MANUAL

124 of 269

2019 BEAM

IPv4 Static Routing
Item

Value setting

Description

Destination
IP

IPv4 Format
Mandatory field.

Enter the Destination IP of this static routing rule.

Subnet
Mask

Default setting
255.255.255.0 (/24).

Enter the Subnet Mask of this static routing rule.

MG200 IP

IPv4 Format
Mandatory field.

Enter the MG200 IP of this static routing rule.

Interface

Default setting: Auto.

Select the Interface of this static routing rule. It can be

Auto

, or

the available WAN / LAN interfaces.

Metric

Numberic String
Format.
Mandatory field.

The Metric of this static routing rule.
Value Range: 0 - 255.

Rule

Disabled by default.

Click

Enable

box to activate this rule.

Save

Click the

Save

button to save the configuration

Back

Button.

When the X button is clicked, the window will return to the
Application Filter Configuration page.

Summary of Contents for MG200




































































































































































































































































































Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands

Beam MG200, User Manual

Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands