Beam MG200, User Manual

Page: 80 / 291

MG200 USER MANUAL
80 of 269
©
2019 BEAM
3.2.2 VLAN
Navigate to the Network > LAN & VLAN > VLAN tab.
The
VLAN window provides the settings on VLAN.
Two VLAN types can be set up in the MG200: Port-based VLAN and Tag-based VLAN .
See following for the Port-based VLAN setting.
Configuration
Item
Value setting Description
VLAN Type Default setting: Port-
based .
Select the VLAN type that you want to adopt for organizing user
local subnets.
Port-based : Port-based VLAN allows you to add rule for each
LAN port, and you can do advanced control with its VLAN ID.
Tag-based : Tag-based VLAN allows you to add VLAN ID, select
member and DHCP Server for this VLAN ID. Navigate to Tag-
based VLAN List table.
System
Reserved
VLAN ID
Default setting: 1 - 5 .
Enter the VLAN ID range that is reserved for the system
operation. For the Port-based/Tag-based VLAN grouping, only
use the ID outside the reserved range.
Value Range: 1 - 4091.
By clicking
Detail , you can check the port members in the existed setting.