Beam MG200, User Manual

Page: 173 / 291

MG200 USER MANUAL
173 of 269
©
2019 BEAM
Authorization Mode.
Password Optional field. Enter the Password for connecting to an OpenVPN server, if the
server required it.
Note: Username will be available only when TLS is chosen in
Authorization Mode.
Bridge TAP to Default setting:
VLAN 1 .
Enter the setting of “ Bridge TAP to ” to bridge the TAP interface
to a certain local network interface or VLAN.
Note: Bridge TAP to will be available only when TAP is chosen in
Tunnel Scenario and NAT is unchecked.
Firewall
Protection Disabled by default. Check the box to activate the Firewall Protection function.
Note: Firewall Protection will be available only when NAT is
enabled.
Client IP
Address Default setting:
Dynamic IP .
Enter the virtual IP Address for the OpenVPN Client.
It can be
Dynamic IP/Static IP.
Tunnel MTU Mandatory field.
Default setting:
1500.
Enter the value of Tunnel MTU.
Value Range: 0 - 1500.
Tunnel UDP
Fragment Default setting:
1500.
Enter the value of Tunnel UDP Fragment.
Value Range: 0 - 1500.
Note: Tunnel UDP Fragment will be available only when UDP is
chosen in Protocol.
Tunnel UDP
MSS-Fix Disabled by default. Check the Enable box to activate the Tunnel UDP MSS-Fix
function.
Note: Tunnel UDP MSS-Fix will be available only when UDP is
chosen in Protocol.
nsCerType
Verification Disabled by default. Check the Enable box to activate the nsCerType Verification
function.
Note: nsCerType Verification will be available only when TLS is
chosen in Authorization Mode.
TLS
Renegotiation
Time (seconds) Default setting:
3600.
Enter the time interval of TLS Renegotiation Time.
Value Range: -1 - 86400.
Connection
Retry(seconds) Default setting: -1. Enter the time interval of Connection Retry.
The default -1 means that it is no need to execute connection
retry.
Value Range: -1 - 86400, and -1 means no retry is required.
DNS Default setting:
Automatically .
Enter the setting of DNS.
It can be Automatically/Manually.
Additional
Configuration Optional field. Enter optional configuration string here. Up to 256 characters is
allowable.
Value Range: 0 - 256characters.
Back Button.
When the X button is clicked, the window will return to the
Application Filter Configuration page.