Beam MG200 User Manual Download Page 261

Page: 261 / 291

MG200 USER MANUAL

261 of 269

2019 BEAM

System Information
Item

Value Setting

Description

Model Name

System data.

Displays the model name of this product.

MG200 Serial
Number

System data.

Displays the serial number of this product.

Kernel
Version

System data.

Displays the Linux kernel version of the product

FW Version

System data.

Displays the firmware version of the product

Memory
Usage

System data.

Displays the percentage of the MG200 memory utilization.

System Time

System data.

Displays the current system time.

MG200 Up-
Time

System data.

Displays the statistics for the MG200 up-time since last boot up.

Refresh

System data.

Click the

Refresh

button to update the system Information

immediately.

7.2.3 System Time

Navigate to the

Administration > System Operation > System Time

tab.

The

System Time Configuration

window provides auto-synchronized and manual setup for you to setup the

system time for the MG200. The time supported synchronization methods can be Time Server, Manual, PC,
Cellular Module, or GPS Signal. Select the method first, and then configure rest settings.
When

Time Server

is selected in

synchronization method field

, the system time will synchronize automatically

to the time server.

Summary of Contents for MG200




































































































































































































































































































Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands

Beam MG200, User Manual

Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands