Beam MG200, User Manual

Page: 278 / 291

MG200 USER MANUAL
278 of 269
©
2019 BEAM
Source MACs Optional setting. Define the filter rule with Source MACs , which means the source
MAC address of packets.
Packets which match the rule will be captured.
Up to 10 MACs are supported, but they need to be separated with
“ ;” ,
e.g. AA:BB:CC:DD:EE:FF; 11:22:33:44:55:66
The packets will be captured when match any one MAC in the rule.
Source IPs Optional setting. Define the filter rule with Source IPs , which means the source IP
address of packets.
Packets which match the rule will be captured.
Up to 10 IPs are supported, but they need to
be separated with “ ;” ,
e.g. 192.168.1.1; 192.168.1.2
The packets will be captured when match any one IP in the rule.
Source Ports Optional setting. Define the filter rule with Source Ports , which means the source port
of packets.
The packets will be captured when match any port in the rule.
Up to 10 ports are supported, but they need to
be separated with “ ;” ,
e.g. 80; 53
Value Range: 1 - 65535.
Destination
MACs Optional setting. Define the filter rule with Destination MACs , which means the
destination MAC address of packets.
Packets which match the rule will be captured.
Up to 10 MACs are supported, but they need to be separated with
“ ;” ,
e.g. AA:BB:CC:DD:EE:FF; 11:22:33:44:55:66
The packets will be captured when match any one MAC in the rule.
Destination IPs Optional setting. Define the filter rule with Destination IPs , which means the
destination IP address of packets.
Packets which match the rule will be captured.
Up to 10 IPs are supported, but they need to be separat
ed with “ ;” ,
e.g. 192.168.1.1; 192.168.1.2
The packets will be captured when match any one IP in the rule.
Destination
Ports Optional setting. Define the filter rule with Destination Ports , which means the
destination port of packets.
The packets will be captured when match any port in the rule.
Up to 10 ports are supported, but they need to
be separated with “ ;” ,
e.g. 80; 53
Value Range: 1 - 65535.
7.4.2 Diagnostic Tools
Navigate to the Administration > Diagnostic > Diagnostic Tools tab.
The Diagnostic Tools provide some frequently used network connectivity diagnostic tools for you to check WAN