Beam MG200, User Manual

Page: 231 / 291

MG200 USER MANUAL
231 of 269
©
2019 BEAM
DDNS : Select DDNS and a trigger condition to enter a certain
DDNS Event;
Administration : Select Administration and a trigger condition
to enter a certain Administration Event;
Data Usage : Select Data Usage , the SIM Card (Cellular Service)
and a trigger condition to enter a certain Data Usage Event;
Description String format: any text. Enter a brief description for the Notifying Event.
Action All box is unchecked by
default. Enter at least one action to take when the expected event is
triggered.
SMS : Select SMS , and the MG200 will send out a SMS to all the
defined SMS accounts as the action for the event;
Syslog : Select Syslog and select/unselect the Enable Checkbox
to as the action for the event;
SNMP Trap : Select SNMP Trap , and the MG200 will send out
SNMP Trap to the defined SNMP Event Receivers as the action
for the event;
Email Alert : Select Email Alert , and the MG200 will send out an
Email to the defined Email accounts as the action for the event;
Remote Host : Select Remote Host checkbox and a Remote
Host profile you define as the action for the event;
Time
Schedule Default setting: (0)
Always .
Select a time scheduling rule for the Notifying Event.
Notifying
Events Disabled by default. Click Enable box to activate this Notifying Event setting.
Save Button. Click the Save button to save the configuration.
Undo Button. Click the Undo button to restore what you just configure back
to the previous setting.