Beam MG200 User Manual Download Page 226

Page: 226 / 291

MG200 USER MANUAL

226 of 269

2019 BEAM

Message

Optional Setting.

accessing the remote host, if required.

Value Range:

-1 - 64 characters.

Enable

Disabled by default.

Click

Enable

box to activate this profile setting.

Save

Button.

Click the

Save

button to save the configuration.

Undo

Button.

Click the

Undo

button to restore what you just configure back to

the previous setting.

6.2.2 Managing Events

Navigate to the

Service

Event Handling

Managing Events

tab.

Managing Events allows you to define the rule between event trigger, handlers and response.

Configuration
Item

Value setting

Description

Managing
Events

Disabled by default.

Check the

Enable

box to activate the Managing Events function.

Setup the Managing Event rules. It supports up to 128 rules.

When

Add

Edit

button is clicked, the

Managing Event Configuration

window will appear.

Summary of Contents for MG200




































































































































































































































































































Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands

Beam MG200, User Manual

Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands