Beam MG200, User Manual

Page: 77 / 291

MG200 USER MANUAL
77 of 269
©
2019 BEAM
Input format is: xxx.xxx.xxx.xxx/xx e.g. 192.168.123.0/24.
IP Range : Enter the IP Range for the traffics come from the IPs
Single IP : Enter a unique IP Address for the traffics come from
the IP. Input format is: xxx.xxx.xxx.xxx e.g. 192.168.123.101.
Destination
IP Address Mandatory field.
Default setting:
Any .
Five options can be selected:
Any : No specific destination IP is provided. The traffic may come
to any destination.
Subnet : Enter the Subnet for the traffics come to the subnet.
Input format is: xxx.xxx.xxx.xxx/xx e.g. 192.168.123.0/24.
IP Range : Enter the IP Range for the traffics come to the IPs
Single IP : Enter a unique IP Address for the traffics come to the
IP. Input format is: xxx.xxx.xxx.xxx e.g. 192.168.123.101.
Domain Name : Enter the domain name for the traffics come to
the domain
Destination
Port Mandatory field.
Default setting:
All .
Four options can be selected:
All : No specific destination port is provided.
Port Range : Enter the Destination Port Range for the traffics
Single Port : Enter a unique destination Port for the traffics
Well-known Applications : Select the service port of well-known
application defined in dropdown list.
Protocol
Mandatory field.
Default setting:
Both .
Three options can be selected. They are Both , TCP , and UDP .
WAN
Interface
Mandatory field.
Default setting:
WAN-
1 .
You can select the interface that traffic should go.
Note that the WAN interface dropdown list will only show the
available WAN interfaces.
Policy Unchecked by default. Check the Enable checkbox to activate the policy rule.
Save
Button Click the Save button to save the configuration
Undo Button
Click the Undo button to restore what you just configure back to
the previous setting.