Beam MG200, User Manual

Page: 106 / 291

MG200 USER MANUAL
106 of 269
©
2019 BEAM
For the WDS Hybrid mode, the MG200 bridges all the wired LAN and WLAN clients to another WDS or WDS
hybrid enabled Wi-Fi MG200s which the MG200 associates with.
WDS Hybrid Mode
Item Value setting Description
Lazy Mode Enabled by default.
Check the Enable box to activate this function.
When the function been enabled, the MG200 can auto-learn WDS
peers without manually entering another
AP’s MAC address. But at
least one of the APs need to fill remote AP MAC addresses.
Green AP
Disabled by
default. Check the Enable box to activate Green AP function.
VAP Isolation Enabled by default.
Check the Enable box to activate this function.
By default, enabling it means that stations which associates to
different VAPs cannot communicate with each other.
Time
Schedule
Mandatory field.
Apply a specific Time Schedule to this rule; otherwise leave it as (0)
Always .
If the dropdown list is empty, ensure Time Schedule is pre-
configured. Refer to User Rule > Scheduling > Configuration tab.
Under
WDS Hybrid mode, the VAP function is available and you can further enter the required VAP settings for
connecting with wireless client MG200s.
Click Add / Edit button in the VAP List window to create or edit the settings for a VAP. A VAP Configuration
window will appear.
For VAP 1: