Beam MG200, User Manual

Page: 182 / 291

MG200 USER MANUAL
182 of 269
©
2019 BEAM
Enable PPTP Window
Item
Value setting Description
PPTP
Disabled by
default.
Click the Enable box to activate PPTP function.
Client/Server Mandatory field.
Enter the role of PPTP. Select Server or Client role your MG200
will take. Below are the configuration windows for PPTP Server
and for Client.
When Server in the Client/Server field is selected, the PPTP server configuration window will appear.
PPTP Server Configuration Window
Item
Value setting Description
PPTP Server
Unchecked by
default.
Check the Enable box to enable PPTP server role of the MG200.
Interface
Mandatory field.
Default setting:
All
WANs .
Select the interface on which PPTP tunnel is to be established. It
can be the available WAN interfaces.
Server Virtual IP
Mandatory field.
Default setting:
192.168.0.1
Enter the PPTP server Virtual IP address. The virtual IP address will
serve as the virtual DHCP server for the PPTP clients. Clients will
be assigned a virtual IP address from it after the PPTP tunnel has
been established.
IP Pool Starting
Address
Mandatory field.
Default value is
10 .
This is the PPTP server’s Virtual IP DHCP server. You can enter the
first IP address for the subnet from which the PPTP client’s IP
address will be assigned.
Value Range: 1 - 254.
IP Pool Ending
Address
Mandatory field.
Default value is
17 .
This is the PPTP server’s Virtual IP DHCP server. You can enter the
last IP address for the subnet from which the PPTP client’s IP
address will be assigned.
Value Range : >= Starting Address, and < (Starting A 8)
or 254.