Beam MG200, User Manual

Page: 119 / 291

MG200 USER MANUAL
119 of 269
©
2019 BEAM
& UDP . Apply Time Schedule to this rule, otherwise leave it as Always .
( refer to Scheduling setting under User Rule)
Then check Enable box to enable this rule.
When
“TCP” is selected.
It means the option “Protocol” of packet filter rule is TCP.
Public Port selected a predefined port from Well-known
Service , and Private Port is the same with Public Port number.
Public Port is selected Single Port and enter a port number, and
Private Port can be set a Single Port number.
Public Port is selected Port Range and enter a port range, and
Private Port can be selected Single Port or Port Range .
Value Range: 1 - 65535 for Public Port, Private Port.
When
“UDP” is selected.
It means the option “Protocol” of packet filter rule is UDP.
Public Port selected a predefined port from Well-known
Service , and Private Port is the same with Public Port number.
Public Port is selected Single Port and enter a port number, and
Private Port can be set a Single Port number.
Public Port is selected Port Range and enter a port range, and
Private Port can be selected Single Port or Port Range .
Value Range: 1 - 65535 for Public Port, Private Port.
When
“TCP & UDP” is selected.
It means the option “Protocol” of packet filter rule is TCP and
UDP.
Public Port selected a predefined port from Well-known
Service , and Private Port is the same with Public Port number.
Public Port is selected Single Port and enter a port number, and
Private Port can be set a Single Port number.
Public Port is selected Port Range and enter a port range, and
Private Port can be selected Single Port or Port Range .
Value Range: 1 - 65535 for Public Port, Private Port.
When
“GRE” is selected.
It means the option “Protocol” of packet filter rule is GRE.
When
“ESP” is selected.
It means the option “Protocol” of packet filter rule is ESP.
When
“SCTP” is selected.
It means the option “Protocol” of packet filter rule is SCTP.