Beam MG200 User Manual Download Page 91

Page: 91 / 291

MG200 USER MANUAL

91 of 269

2019 BEAM

DHCP Server Configuration
Item

Value setting

Description

DHCP
Server
Name

Enter text string.
Mandatory field.

Enter the DHCP Server name. Enter a name that is easy for you to
understand.

LAN IP
Address

IPv4 format.
Mandatory field.

The LAN IP Address of this DHCP Server.

Subnet
Mask

Default setting:
255.0.0.0 (/8)

The Subnet Mask of this DHCP Server.

IP Pool

IPv4 format.
Mandatory field.

The IP Pool of this DHCP Server. It composed of Starting Address
entered in this field and Ending Address entered in this field.

Lease Time

Numberic string
format.
Mandatory field.

The Lease Time of this DHCP Server.

Value Range:

300 - 604800 seconds.

Summary of Contents for MG200




































































































































































































































































































Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands

Beam MG200, User Manual

Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands