Beam MG200 User Manual Download Page 36

Page: 36 / 291

MG200 USER MANUAL

36 of 269

2019 BEAM

The

Wi-Fi Traffic Statistic

shows all the received and transmitted packets on each Wi-Fi module.

Wi-Fi Traffic Statistic

Item

Value setting

Description

Op. Band

System data.

Displays the Wi-Fi Operation Band (2.4G) of VAP.

System data.

Displays the VAP ID.

Received
Packets

System data.

Displays the number of received packets.

Transmitted
Packets

System data.

Displays the number of transmitted packets.

Action

Buttons.

Click the

Reset

button to clear individual VAP statistics.

2.2.4 DDNS

Navigate to the

Status > Network > DDNS

tab.

The

DDNS Status

window shows the current DDNS service in use, the last update status, and the last update

time to the DDNS service server.

DDNS Status
Item

Value Setting

Description

Host Name

System data.

Displays the name you enter to identify DDNS service provider.

Provider

System data.

Displays the DDNS server of DDNS service provider.

Effective IP

System data.

Displays the public IP address of the MG200.

Last Update
Status

System data.

Displays whether the last update of the MG200 public IP address to
the DDNS server has been successful (Ok) or failed (Fail).

Last Update
Time

System data.

Displays time stamp of the last update of public IP address to the
DDNS server.

Refresh

Button.

The

refresh

button allows you to force the display to refresh

information.

Summary of Contents for MG200




































































































































































































































































































Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands

Beam MG200, User Manual

Search results

Summary of Contents for MG200

Reviews:

Brands by name

Popular brands