Beam MG200, User Manual

Page: 142 / 291

MG200 USER MANUAL
142 of 269
©
2019 BEAM
Application (String format: any text, default setting: pkiclient.exe
is filled.)
FTP(SFTP) Server (Mandatory field.):
When FTP(SFTP) Server is selected, the following settings are also
required.
Username (String format: any text)
Password (String format: any text)
Protocol (Select FTP or SFTP)
Encryption (Select Plain, Explicit FTPS or Implicit FTPS)
Transfer mode (Select Passive or Active)
Server
IP/FQDN
Mandatory field. Enter the IP address or FQDN used for the external server.
Server Port Mandatory field.
Enter the Port used for the external server. If you selected a certain
server type, the default server port number will be set.
Email Server, d efault setting: 25;
Syslog Server , d efault setting: 514;
For RADIUS Server , d efault setting: 1812, 1823;
For Active Directory Server , d efault setting: 389;
For LDAP Server , d efault setting: 389;
For UAM Server , d efault setting: 3990, 4990;
For Server , d efault setting: 49;
For SCEP Server , d efault setting: 80;
For FTP(SFTP) Server , d efault setting: 21;
Value Range: 1 - 65535.
Account Port
Mandatory field.
Default setting: 1813.
Enter the accounting port used if you selected external RADIUS
server.
Value Range: 1 - 65535.
Server
Enabled by default. Click Enable to activate this External Server.
Save Button. Click Save to save the settings.
Refresh Button. Click the Refresh button to refresh the external server list.