Beam MG200, User Manual

Page: 120 / 291

MG200 USER MANUAL
120 of 269
©
2019 BEAM
When
“ User- defined” is selected.
It means the option “Protocol” of packet filter rule is User-
defined.
For
Protocol Number , enter a port number.
Time
Schedule
Optional Setting.
Default setting is
(0)
Always .
Apply Time Schedule to this rule; otherwise leave it as (0) Always.
(refer to Scheduling setting under User Rule)
Rule
Optional Setting.
Disabled by default.
Check the Enable box to activate the rule.
Save Button. Click the Save button to save the settings.
Back Button.
When the X button is clicked, the window will return to the
Application Filter Configuration page.
The MG200 allows you to customize your Virtual Computer rules. It supports up to a maximum of 20 rule-based
Virtual Computer sets.
When
Add button is applied, Virtual Computer Rule Configuration window will appear.
Virtual Computer Rule Configuration
Item
Value setting Description
Global IP Mandatory field. This field is to enter the IP address of the WAN IP.
Local IP
Mandatory field. This field is to enter the IP address of the LAN IP.
Enable System data. Then check Enable box to enable this rule.
Save
System data. Click the Save button to save the settings.
Back Button.
When the X button is clicked, the window will return to the
Application Filter Configuration page.