AVerVision F30, Procedures Manual

Page: 76 / 190

B. Daily Use
**Your ForntRow Pro digital has an energy-saving STANDBY mode.**
The receiver will automatically go into STANDBY mode 10 minutes after
you turn off or mute your pendant or stop playing a secondary audio
source (ex. Computer).
The computer will come out of STANDBY mode automatically when:

You turn on and/or un-mute a pendant.

You play an audio source connected to the receiver.
START OF THE DAY
1. Put pendant around your neck and adjust the strap so it is 5 in. from
your mouth.
2. Turn pendant on. This will also take the receiver out of STANDBY
mode.
3. Speak in a normal conversational tone.
END OF THE DAY
1. Turn pendant off. NOTE: Receiver will go into STANDBY mode
automatically. You do not need to turn it off.
2. Charge pendant overnight by plugging into the charge cord on the back
of the receiver.
**Once the pendant and auxiliary audio volume is set to the optimal
level, the only thing you need to remember is to turn the pendant on in
the morning and turn it off and charge it in the evening.**
**To play auxiliary audio through the system, you simply need to press
"play" on your auxiliary audio source and "stop" when you are finished.**