AVerVision F30, Procedures Manual

Page: 107 / 190

4. Repeat step 3 until you arrive at the last point.
NOTE
If you aren’t satisfied with the precision of a particular point, press the left arrow key on your
computer’s keyboard to repeat the orientation for that point.
5. At the last point, touch the center of the target firmly and continue pressing until the message
“Please wait while Orientation completes
”
appears.
The orientation screen closes.
The orientation procedure can be 4, 9, 12 or 20 touches, depending on the precision setting you specify
in your SMART Board Settings in the SMART control panel. The following procedure shows you how to
change the precision setting.
To select a 4-, 9-, 12- or 20-point orientation procedure
1. Press the SMART Board icon in the icon tray (click on the arrow at the bottom right by the clock
if you do not see it to expand the tray), and then select SMART Settings .
2. Press
SMART Hardware Settings
.
3. Select Orientation/Alignment Settings from the drop-down list.
4. Select the desired orientation setting (4-, 9-, 12-, or 20- point orientation), and then press OK .
5. Perform an orientation procedure so that the changes take effect.