IP Office Basic Edition - Quick Mode Installation
Page 15
15-601042 Issue 24i (20 December 2011)
IP Office 8.0
System Overview: IP Office Modes
1.2 IP500 V2 System Components
The following are the typical components of an IP Office system based on an IP500 V2 control unit.
·
IP Office IP500 V2 System Unit
The control unit holds the main configuration and performs the
routing and switching for telephone calls and data traffic. Each
control unit includes 4 slots for optional base cards to support
trunk and phone extension ports.
·
Avaya SD Card
This uniquely numbered dongle is used to validate license
keys entered into the system's configuration to enable
features. A dongle is mandatory for correct system operation
even if no licensed features are being used. IP500 V2 control
units use an Avaya SD card which is slotted into the rear of
the control unit. This card also provides Embedded Voicemail
support and storage for system software files.
·
IP500 Base Cards
The IP500v2 control unit has slots for up to 4 IP500 base cards.
These can be used to add ports for analog extensions, digital
extensions, voice compression channels and other resources.
·
IP500 Digital Station Base Card
·
IP500 Analog Phone Base Card
·
IP500 TCM8 Base Card
·
IP500 ETR6 Base Card
·
·
IP500 Trunk Daughter Cards
Many of the IP500 base cards can be fitted with an IP500 daughter
card in order to support various types of trunk connections.
·
IP500 Analog Trunk Card
·
IP500 BRI Trunk Card
·
IP500 PRI Trunk Card
·
IP500 Combination Cards
These card are pre-paired base and daughter cards. They provide
6 digital station ports, 2 analog phone ports, 10 voice compression
channels and either 4 analog trunk ports or 4 BRI channels (2
ports). The trunk daughter card cannot be removed or replaced
with another type.
VK00nDd15SDvXoxkw9cR9x_jOXr_AWz9
·
License Keys
Various IP Office features and applications require a license key to
be entered into the system's configuration. Each key is a 32-
character text string unique to the feature being activated and the
serial number of the Feature Key dongle installed in the system.
·
IP500 External Expansion Modules
Additional ports can be added using a number of IP500 external
expansion modules.
·
Systems running in IP Office Basic Edition - Quick Mode mode
support up to 8 external expansion modules so long as the
system extensions limit is not exceeded.
·
Power Supplies
The IP500 control unit has an internal power supply unit. Each
external expansion module is supplied with an external power
supply unit. Additional power supply units may also be required for
IP phones and some phone add-ons.
155
31
17
163
160
166
164
19
168
169
170
17
20
22
