manualshive.com logo in svg

Avaya IP Ofice 8.0, Quick Mode Instaltion

Avaya IP Office 8.0 user manual is available for free download in Quick Mode Installation guide. Unlock the full potential of your communication system with step-by-step instructions and detailed explanations. Visit manualshive.com now to access the comprehensive manual and optimize your IP Office experience.

Share
Download
background image

IP Office Basic Edition - Quick Mode Installation

Page 119

15-601042 Issue 24i (20 December 2011)

IP Office 8.0

Additional Processes: Upgrading the IP Office Software

7.7.2 Using an SD Card

In addition to using the traditional 

IP Office Upgrade Wizard

, IP500 V2 control units can be upgraded by loading the

required set of firmware files onto the System SD card and rebooting the system. 

·

!

 IP Office Technical Bulletins 

Ensure that you have obtained and read the IP Office Technical Bulletin relating to the IP Office software release
which you are installing. This bulletin will contain important information that may not have been included in this
manual. IP Office Technical Bulletins are available from the 

Avaya support

 website (

http://support.avaya.com

). 

·

!

 Upgrade Licenses 

Some upgrades may require entry of upgrade licenses. It is still possible to upgrade the system without the
necessary licenses, however the system will not provide any telephony functions after the upgrade until the
appropriate license is added to the system configuration.  

·

!

 WARNING 

This process will require the IP Office system to reboot in order to complete the process. Any current calls and
services will be ended by the reboot.

There are a number of ways in which this can be done. 

Method

Description

Location

Software

Files

Embedded

Voicemail

Prompts

Using Manager

Using IP Office Manager, the contents of the card are
compared to the files that Manager has available and
are upgraded if necessary. 

Local or

Remote

System SD Card
Upgrade

In this method, the System SD card is shut down and
removed from the control unit. The card's contents are
upgraded using IP Office Manager. 

Local

Upgrade from
Optional SD Card

This method uses an SD card loaded with the required
version of IP Office software. The card is inserted into
the control unit's  Option SD card slot and its contents
copied to the System SD card. 

Local

–

117

148

148

149

Summary of Contents for IP Ofice 8.0

































































































































































































































































Reviews:

No comments

Related manuals for IP Ofice 8.0

Neoi 809 User Manual preview
809
Brand: Neoi Pages: 40
Samsung Galaxy XCover FieldPro Quick Start Manual preview
Galaxy XCover FieldPro
Brand: Samsung Pages: 14
Samsung Galaxy Z Fold4 Notes On Usage preview
Galaxy Z Fold4
Brand: Samsung Pages: 55
Samsung Galaxy Z Flip 5G Quick Start Manual preview
Galaxy Z Flip 5G
Brand: Samsung Pages: 2
Samsung Galaxy Z Fold4 User Manual preview
Galaxy Z Fold4
Brand: Samsung Pages: 184
Samsung Galaxy Z Flip Quick Start Manual preview
Galaxy Z Flip
Brand: Samsung Pages: 2
Samsung GALAXY S5 Disassemble Manual preview
GALAXY S5
Brand: Samsung Pages: 9
Samsung GALAXY SII Start Manual preview
GALAXY SII
Brand: Samsung Pages: 25
Samsung Galaxy Tab S2 Manual For Use preview
Galaxy Tab S2
Brand: Samsung Pages: 16
O2 XM User Manual preview
XM
Brand: O2 Pages: 72
Yealink Yealink SIP-T48G Quick Reference Manual preview
Yealink SIP-T48G
Brand: Yealink Pages: 9
Yealink Yealink SIP-T42G Quick User Manual preview
Yealink SIP-T42G
Brand: Yealink Pages: 2
Audiovox TRAN-410A Owner Operating Instructions preview
TRAN-410A
Brand: Audiovox Pages: 13
Unify OpenStage SL4 professional HiPath Cordless... User Manual preview
OpenStage SL4 professional HiPath Cordless...
Brand: Unify Pages: 80
Easiphone MM461 Instruction Manual preview
MM461
Brand: Easiphone Pages: 89
Manta TEL1713 Manual Manual preview
TEL1713
Brand: Manta Pages: 20
ShoreTel IP-480 User Manual preview
IP-480
Brand: ShoreTel Pages: 2
Teldat elmeg IP130 User Manual preview
elmeg IP130
Brand: Teldat Pages: 165

Brands by name

Popular brands

Load more brands