Amada MF-C2000A Series, Operation Manual, Page: 59 / 272

5 . Connecting the Optical Fiber
59
MF-C2000A Series
Chapter 2 Connections and Preparations of Each Section
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
(2) Remove the protective cap at the end of the optical fiber.
(3) Place the cleaning paper on the end of the quartz block.
(4) Place a drop of isopropanol in the quartz block area over the cleaning paper.
Wipe the quartz block by pulling the cleaning paper across it.
(5) Check that there is no stain, dust and streak on the end of the quartz block and
return the protective cap.