Amada MF-C2000A Series, Operation Manual, Page: 46 / 272

46
MF-C2000A Series
1 . Installation Place
Environment Suitable for Installation and Precautions
⇒
In laser processing, dust and fumes are generated from workpiece. Depending
on the kind of workpiece, they may adversely affect a human body. Also, dust
and fumes from workpiece may cause staining and burning of optical parts and
lower the laser output. Furthermore, if conductive dust enters the laser equip-
ment, a short circuit accident may occur to cause malfunction. Therefore, in laser
processing, be sure to install an exhaust device such as dust collector and blow-
er in a proper position to keep a clean environment.
⇒ Use the product in a place where the ambient temperature is 5 to 40ºC and the
ambient humidity is 20 to 85% RH and yet a sudden temperature change does
not occur. If the humidity is higher than values shown below, condensation may
occur.
0
10
20
30
40
50
60
70
80
90
5 10 15 20 25 30 35 40
500mm 500mm
1000mm
500mm
Upper limit of ambient humidity
Ambient temperature (ºC)
Humidity (%)