Amada MF-C2000A Series, Operation Manual, Page: 227 / 272

3 . Maintenance of the Chiller
227
MF-C2000A Series
Chapter 1 How to Perform Maintenance
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
Replacing the Cooling Water
Replace the cooling water within 6 months.
Item required
Cooling water (10 liters), water feed pump, and vinyl gloves
CAUTION
Use cooling water meeting water quality standard established by Japan Refrigeration
and Air Conditioning Industry Association (JRA GL-02-1994 / cooling water system
- cyclic water - makeup water) when preparing some by customers . Tap water, wa-
ter for industrial use, or ground water may cause corrosion or clogging, resulting in
fault of the equipment .
Inspecting Water Leaks from the Pump
Remove panels of the chiller to check the pump for abnormal leaks when replacing
the cooling water (every 6 months recommended).
If abnormal water leaks, consult us to return the chiller and replace the mechanical
seal.
Item required
Phillips screwdriver
CAUTION
Because of its structure, the mechanical seal cannot completely eliminate leakage .
An amount of leakage is 3 ml/hour or less .
Check here for leaks .