Amada MF-C2000A Series, Operation Manual, Page: 146 / 272

146
MF-C2000A Series
3 . Operating Procedure
(2) Turn ON the CONTROL keyswitch.
The engine (oscillator) is automatically checked.
The SCHEDULE screen appears.
2
Setting Output Schedules
As an example, the procedure for setting SCHEDULE No.5, laser output set value
500, FLASH1 laser output time 30 ms/output value 50%, and up-slope 10 ms is ex-
plained below.
(1) Press the "SCHED" button to display the SCHEDULE screen.
(2) Press the "SCHEDULE" setting button.
Enter the SCHEDULE number by using by using the "<" and ">" buttons or nu-
meric keypad and then press the ENT key.
In this example, set #5.
⇒
As the SCHEDULE number, it is possible to set 255 schedules of #000 to #254.
In "FORM", the fixed waveform "FIX", flexible waveform of pulse oscillation
"FLEX", or flexible waveform of CW (continuous) oscillation "CW" can be speci -
fied.
⇒
When the registered SCHEDULE number is entered, the set output schedules
are displayed.
(3) Press the "SET POWER" setting button.
Enter the laser output set value by using the numeric keypad and then press the
ENT key.
In this example, set 500.