Amada MF-C2000A Series, Operation Manual, Page: 101 / 272

3 . Changing the Equipment Settings
101
MF-C2000A Series
Chapter 2 V
arious Settings
Introduction Part
Inst
allat
ion and Preparation Part
Operating Part
Maintenance Part
Appendixes
SET-POWER SYNCHRONIZE SETTING
How to see the displayed items
: Settable item
SCHEDULE No . Up to five sets of schedules to synchronize can be set in No.1 to No.5.
In an example of the screen above, laser output set values of SCHEDULEs #0
and #10 are synchronized. When the laser output set value of #0 is changed,
that of #10 is also changed into the same value. The laser output set value
cannot be changed if the setting error will occur in the synchronous schedule.
Also, [LINKED: #] is displayed at the upper right portion of the SCHEDULE
screen of the set SCHEDULE number to recognize the synchronous target.
X
Returns to the CONFIG screen.