Amada MF-C2000A Series, Operation Manual, Page: 217 / 272

1 . Maintenance Parts and Standard Intervals of Inspection/Replacement
217
MF-C2000A Series
Chapter 1 How to Perform Maintenance
Introduction Part
Operating Part
Maintenance Part
Appendixes
Installation
and
Preparation
Part
Part name Model No . or specification
Operation
interval
(standard) (*1)
Contents of
operation
(*2)
Protective glass Specified glass for output unit
Every day Clean
Every month
Replace
(*8)
Lithium battery (*9) CR2032 3V 3 years Replace
Memory card (*9)
Compliant with SD Specification
Ver3.01
3 years Replace
Element assembly for AMH150
(*10)
AMH-EL150
2 years after
use
Replace
Membrane module for IDG3 (*10) IDG-EL3
10 years after
use
Replace
Dewpoint checker set for IDG3
(*10)
IDG-DP01
2 years after
use
Replace
Solenoid valve (*10) VX210EGXCC 5 years Replace
■ For the hatched portion, our engineer takes charge of maintenance work.
*1: The operation interval means the maintenance time or expected life of the
part, and is different from the warranty period.
*2: Part replacement is performed when any damage or defect is found or the
usable period ends.
*3: When the laser is stopped for a long time (for about one month), the usable
period of the lithium battery is shortened.
*4: The optical unit is the laser oscillator including the excitation LD. If the la-
ser output drops down and the processing conditions cannot be restored
despite setting the maximum output, it is determined as the end of its use-
ful life. The warranty is valid for a period of two years. However, usage out
of specifications, for example, failing to perform cleaning when connecting
the optical fiber described in the Installation and Preparation Part, Chapter
2 “5. Connecting the Optical Fiber” on page 58 or keep the bending radius
of the optical fiber, is not covered by the warranty.
*5: For option.
*6: The filter cartridge is the water filter used in the chiller.
*7: Use cooling water meeting water quality standard established by Japan
Refrigeration and Air Conditioning Industry Association (JRA GL-02-1994 /
cooling water system - cyclic water - makeup water).
*8: We do not specify a degree of parallelism of our standard protective glass.
Therefore, the condensing position may be shifted before and after replac-
ing the protective glass due to individual differences. The protective glass
having a very small positional deviation is also available. Contact us as
needed.
*9: Only for MF-C2000A-MC/SC
*10: Only when the dry air unit (option) is equipped