Agilent Technologies InfiniiVision 4000 X-Series, Programmer'S Manual

Page: 37 / 1352

What's New
1
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 37
Command Differences From 3000 X-Series Oscilloscopes
The Agilent InfiniiVision 4000 X- Series oscilloscopes command set is most
closely related to the InfiniiVision 3000 X- Series oscilloscopes (and the
7000A/B Series, 6000 Series, and 54620/54640 Series oscilloscopes before
them).
The main differences between the version 3.00 programming command set
for the InfiniiVision 4000 X- Series oscilloscopes and the 2.10 programming
command set for the InfiniiVision 3000 X- Series oscilloscopes are related
to:
• Zone qualified trigger feature.
• USB 2.0 triggering and serial decode options (which replace the old
:TRIGger:USB commands).
• Two- channel built- in waveform generator (with Option WGN license)
instead of one channel.
• Support for modulation of the waveform generator output on WaveGen1.
• A couple new built- in demo signals (with Option EDU license that
comes with the N6455A Education Kit).
• Four reference waveforms (instead of two).
• Four math functions (instead of g(t) and f(t)).
• Touchscreen, sidebar, and display related command additions.
• Measure cursors mode.
• Support for controlling the optional DSOXDVM digital voltmeter analysis
feature.
• Power measurements application modifications.
More detailed descriptions of the new, changed, obsolete, and discontinued
commands appear below.
New Commands
Command Description
:ACQuire:RSIGnal (see
page 233 )
Lets you select the 10 MHz reference signal mode.
:DISPlay:MENU (see
page 319 )
Changes the front panel softkey menu.
:DISPlay:SIDebar (see
page 320 )
Specifies the sidebar dialog to display on the screen.
:DVM Commands (see
page 323 )
Commands for controlling the optional DSOXDVM digital
voltmeter analysis feature.
:FUNCtion<m>:AVERage:COU
Nt (see
page 341 )
Specifies the count for the Averaged Value math function.