Agilent Technologies InfiniiVision 4000 X-Series, Programmer'S Manual

Page: 643 / 1352

:SAVE Commands
27
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 643
:SAVE:WMEMory:SOURce
(see page 1208 )
Command Syntax
:SAVE:WMEMory:SOURce <source>
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1-4 in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :SAVE:WMEMory:SOURce command selects the source to be saved as a
reference waveform file.
Query Syntax
:SAVE:WMEMory:SOURce?
The :SAVE:WMEMory:SOURce? query returns the source to be saved as a
reference waveform file.
Return Format
<source><NL>
<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}
See Also
• "Introduction to :SAVE Commands" on page 623
• ":SAVE:WMEMory[:STARt]" on page 644
• ":RECall:WMEMory<r>[:STARt]" on page 620
N O T E
Only ADD or SUBtract math operations can be saved as reference waveforms.
N O T E
MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or
MATH.