Agilent Technologies InfiniiVision 4000 X-Series, Programmer'S Manual

Page: 4 / 1352

4 Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
• Chapter 9 , “:CALibrate Commands,” starting on page 253, describes
utility commands for determining the state of the calibration factor
protection button.
• Chapter 10 , “:CHANnel<n> Commands,” starting on page 263, describes
commands that control all oscilloscope functions associated with
individual analog channels or groups of channels.
• Chapter 12 , “:DEMO Commands,” starting on page 293, describes
commands that control the education kit (Option EDU) demonstration
signals that can be output on the oscilloscope's Demo 1 and Demo 2
terminals.
• Chapter 13 , “:DIGital<d> Commands,” starting on page 301, describes
commands that control all oscilloscope functions associated with
individual digital channels.
• Chapter 14 , “:DISPlay Commands,” starting on page 309, describes
commands that control how waveforms, graticule, and text are displayed
and written on the screen.
• Chapter 15 , “:DVM Commands,” starting on page 323, describes
commands that control the optional DSOXDVM digital voltmeter analysis
feature.
• Chapter 16 , “:EXTernal Trigger Commands,” starting on page 331,
describes commands that control the input characteristics of the
external trigger input.
• Chapter 17 , “:FUNCtion<m> Commands,” starting on page 337, describes
commands that control math waveforms.
• Chapter 18 , “:HARDcopy Commands,” starting on page 369, describes
commands that set and query the selection of hardcopy device and
formatting options.
• Chapter 19 , “:LISTer Commands,” starting on page 387, describes
commands that turn on/off the Lister display for decoded serial data
and get the Lister data.
• Chapter 20 , “:MARKer Commands,” starting on page 391, describes
commands that set and query the settings of X- axis markers (X1 and
X2 cursors) and the Y- axis markers (Y1 and Y2 cursors).
• Chapter 21 , “:MEASure Commands,” starting on page 407, describes
commands that select automatic measurements (and control markers).
• Chapter 22 , “:MEASure Power Commands,” starting on page 485,
describes measurement commands that are available when the
DSOX4PWR power measurements and analysis application is licensed
and enabled.
• Chapter 23 , “:MTESt Commands,” starting on page 507, describes
commands that control the mask test features provided with
Option LMT.