Agilent Technologies InfiniiVision 4000 X-Series, Programmer'S Manual

Page: 970 / 1352

970 Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32
:TRIGger Commands
:TRIGger:GLITch:LEVel
(see page 1208 )
Command Syntax
:TRIGger:GLITch:LEVel <level_argument>
<level_argument> ::= <level>[, <source>]
<level> ::= .75 x full-scale voltage from center screen in NR3 format
for internal triggers
<level> ::= ±(external range setting) in NR3 format
for external triggers (DSO models)
<level> ::= ±8 V for digital channels (MSO models)
<source> ::= {CHANnel<n> | EXTernal} for DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :TRIGger:GLITch:LEVel command sets the trigger level voltage for the
active pulse width trigger.
Query Syntax
:TRIGger:GLITch:LEVel?
The :TRIGger:GLITch:LEVel? query returns the trigger level of the current
pulse width trigger mode. If all channels are off, the query returns
"NONE."
Return Format
<level_argument><NL>
See Also • "Introduction to :TRIGger Commands" on page 935
• ":TRIGger:MODE" on page 944
• ":TRIGger:GLITch:SOURce" on page 974
• ":EXTernal:RANGe" on page 334