3.2.3 Expected component life
General
The expected life of a specific component of the robot can vary greatly depending
on how hard it is run.
Expected component life - protection type Standard
Note
Expected life
Component
Not including:
•
Possible SpotPack
harnesses
•
Optional upper arm
harnesses
40,000 hours
ii
Cable harness
Normal usage
i
Not including:
•
Possible SpotPack
harnesses
•
Optional upper arm
harnesses
20,000 hours
Cable harness
Extreme usage
iii
40,000 hours
iv
Balancing device
40,000 hours
Gearboxes
v
i
Examples of "normal usage" in regard to movement: most material handling applications.
ii
Severe chemical or thermal environments, or similar environments, can result in shortened life
expectancy.
iii
Examples of "extreme usage" in regard to movement: press tending, very severe palletizing
applications, major use of axis 1 movement.
iv The given life for the balancing device is based on a test cycle of 4,000,000 cycles that starts from
the initial position and goes to maximum extension, and back. Deviations from this cycle will result
in differences in expected life!
v
The SIS for an IRC5 system is described in the
Operating manual - Service Information System
.
Product manual - IRB 6700Inv
97
3HAC058254-001 Revision: L
© Copyright 2017 - 2020 ABB. All rights reserved.
3 Maintenance
3.2.3 Expected component life
Summary of Contents for IRB 6700I
