Installation Manual for digital sets - IP sets - SIP sets
AMT/PTD/TR/0001/3/7/EN
To install sets and cartridges in the i7XX range
05/2008
Page
5-49
5.6.4
Installation
5.6.4.1
Connections
Refer to the network connection diagram in section 12.2.3.
If required, refer to the mains connection diagram, section 12.2.4.
5.6.4.2
Connection
To the LAN
: using a Ethernet cord not supplied (remote supply possible via the LAN).
Set of 10 Ethernet cables:HT1455A.
To the telephone handset
: by a coiled cable with an RJ9 type male connector at each end.
To the headset
: see Section 12.3.1.
To the mains
: using a power supply unit (PN1120A) if power is not remotely supplied to the set via
the LAN.
5.6.4.3
Default settings on delivery
Key sound :Yes
Level :4
Ring: 4
Level:4
Handset volume
Level :5
Speaker volume
Level :6
Headset Microphone volume
Level :5
Keypad:-Qwerty (E others)
-Azerty ( French-speaking countries)
Direct call: Int.
Display:-Contrast: 8
-Saver timeout: 15 min.
