Installation Manual for digital sets - IP sets - SIP sets
AMT/PTD/TR/0001/3/7/EN
To install sets and cartridges in the i7XX range
05/2008
Page
5-35
5.4.4.10 Login/logout Function – in release 3.2 and later
In release 3.2 and later, the login/logout function enables you to assign another number to a set
that is already logged on.
This function is implemented by using feature access codes *44 to retrieve subscriber rights from
another set, and #44 to deactivate them.
•
To assign another number (and retrieve subscriber rights), enter successively:
-
the feature access code
*
4 4
-
the extension number
-
the set's secret code.
•
To deactivate the number assignment function, enter the feature access code
#
4 4
5.4.4.11 Summary of installer codes used
The following table gives the various parameters that can be accessed:
Access condition:
Code:
Function:
After power up, at the end of the
initialisation period, when "?" is
displayed and within 5s
Prog * 1
Configuring network parameters
In standby and during a call
Prog * 2
Viewing the configured parameters
Accessible any time
Prog * 5
Viewing the identification parameters
After power up, at the end of the
initialisation period, when "?" is
displayed and within 5s
Prog * 7
Configuring Ethernet parameters
In standby
Prog * *
Restarting the set
After power up, followed with
to validate
Prog * 9
Return to the factory parameters and to the
default IP configuration (total DHCP,
disappearance of subscriber’s number).
