AMT/PTD/TR/0001/3/7/EN
Installation Manual for digital sets - IP sets - SIP sets
Page
8-40 05/2008
SIP PHONEs 480i, 9112i and 9133i
8.9.6.2
Specific configuration file content
This configuration file ‘@MAC.cfg’ is used for data specific to each phone.
Filenames, for example '00085D030FC7.cfg, must contain only upper case characters.
The specific parameters of a phone are generally:
•
The name displayed on the phone’s screen
•
The subscriber number
•
The key programming
The data below is communicated as examples and presents most of the parameters of a phone
480i to configure for the NeXspan solution.
This file must be reviewed for each installation, based on the need.
Some parameters must retain the default value for the NeXspan solution, as indicated below.
###########################################################################
# 480i
###########################################################################
#
sip screen name: "NeXspan R4.2" # The name displayed on the phone’s screen
sip user name: 603
# NeXspan subscriber number
#sip proxy ip: 136.10.1.138
# GSI IP address if different from that of the file aastra.cfg
#sip registrar ip: 136.10.1.138
# GSI IP address if different from that of the file aastra.cfg
#sip line1 vmail: 797
# Voice mail call
…
#sip line9 vmail: *53
#sip line1 screen name: subscr 3010# Name displayed for line 1
#sip line1 user name: 3010
line 1 subscriber number
…
#sip line9 screen name: subscriber 30610
#sip line9 user name: 30610
#sip line1 mode: 0
# The value 0 is obligatory for NeXspan.
…
#sip line9 mode: 0
#sip line1 proxy ip: 136.10.1.138
# Specific connection to an SIP Proxy for line 1
…
#sip line9 proxy ip: 136.10.1.138
# 9 lines maximum for a phone 480i
#sip line1 proxy port: 5060
# port 5060 _ line 1
…
#sip line9 proxy port: 5060
#sip line1 registrar ip: 136.10.1.138# @IP GSI _ line 1
