Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
Installation of sets in the M7xx range
05/2008
Page
4-25
4.7.2.1
As of R1.3
With ATDC declaration via MMC, the keys are programmed automatically, as in the diagram below
The accompanying labels are supplied with the ATDC guide (kit).
4.7.2.2
From V11.3 up to R1.2 (inclusive)
In addition to declaring the ATDC via MMC, the M760/M760E has to be configured locally, in order
to allocate physically the programmable keys, as in the same diagram as above (in R1.3).
The procedure for this local operation on the M760/M760E (PROG-9-7 after plugging in) is given in
the ATDC guide. Before R1.3, when the set is plugged in, the software and ATDC configuration is
displayed for a few seconds.
Attention :
The Enabling and Incoming (right side) keys are programmed on the set and
must not therefore be programmed on the PBX. Via MMC check that they are
free (not programmed).
|
OVERLOAD SIGNALLING MUTE
CONSOLE ACTIVE
|
|
MONITORING YOUR NUMBER 1
CALL SUPERVISION PSTN INC 1
|
|
MONITORING YOUR NUMBER 2
CALL SUPERVISION PSTN INC 2
|
|
MONITORING YOUR NUMBER 3
CALL SUPERVISION TIE LINE INC
|
|
MONITORING YOUR NUMBER 4
CALL SUPERVISION INTERNAL
|
|
ALARM MONITORING
|
|
RESERVATION SIGNALLING
|
|
MONITORING YOUR NUMBER 5
|
|
MONITORING YOUR NUMBER 6
|
|
|
Left column
Right column
Program keys
