Installation Manual for digital sets - IP sets - SIP sets
AMT/PTD/TR/0001/3/7/EN
To install sets and cartridges in the i7XX range
05/2008
Page
5-45
5.5.4.8
To log out
To log out a set, the following operations must be carried out:
•
Unplug and plug the set back in. An initialisation phase is activated (at the end of this
initialisation phase, a question mark is displayed to the left of the display)
•
Enter the following sequence within 5 seconds:
*
1
used to enter network parameters in the configuration menu; the menu's "Phone number" is
displayed.
Then, the standby screen is displayed with a prompt to enter a directory number:
Then, after entering the set n°, enter the code.
0
5[\[\[
8SOXJWKHQSRZHU
XSDJDLQ
"
L
5[\[\[
V
L
5[\[\[
:LWKLQV
(QWHU
(QWHU
$IWHUGHOHWLRQ
WRGHOHWH
3KRQHQXPEHU
3KRQHQXPEHU
'LVSOD\RIWKH
'LUHFWRU\QXPEHURSWLRQ
WRGHOHWH
$IWHUGHOHWLRQ
3DVVZRUG
3DVVZRUG
3OHDVHZDLWVWRUDJHLQSURJUHVV«
FRQILUPDWLRQ
&RQQHFWLQJVHUYHU[
WKHQ
'LVFRQQHFWLRQLQLWLDWHG
(17(5<2856(71R
&RPP
