AMT/PTD/TR/0001/3/7/EN
Installation Manual for digital sets - IP sets - SIP sets
Page
4-28 05/2008
Installation of sets in the M7xx range
4.8.4
Installation
4.8.4.1
Connections
See connection diagram, section 12.2
See mains connection diagram, section 12.2.
4.8.4.2
Connection
To the telephone network: by a 3.10 m long cord with an RJ45 type male connector for the wall end
connection and an RJ11 type male connector for connection at the set end.
To the telephone handset: by a coiled cable with an RJ9 type male connector at each end.
To the headset: see Section 12.3.1
To the mains: through power unit HT1438A.
4.8.4.3
To start before R1.3
Recommendations
Before R1.3, the user had to select the set's language (label display managed locally by the set) in
order to synchronize it with the system it was connected to (label display sent by the system in the
country's language).
As of R1.3, this synchronization is performed automatically when the set is connected.
Procedure (Before R1.3)
Once the set is connected, the screen of the M780 displays:
for a few seconds
This set can only be used as of system version V11.5.
