AMT/PTD/TR/0001/3/7/EN
Installation Manual for digital sets - IP sets - SIP sets
Page
5-52 05/2008
To install sets and cartridges in the i7XX range
5.6.4.9
Summary of installer codes used
Access condition:
Code:
Function:
After power up, at the end of the
initialisation period, when "?" is
displayed and within 5s
* 1
Configuring network parameters
In standby and during a call
* 2
Viewing the configured parameters
After power up, at the end of the
initialisation period, when "?" is
displayed and within 5s
Accessible at any moment as from set
version R5.3
* 5
Viewing the identification parameters
After power up, at the end of the
initialisation period, when "?" is
displayed and within 5s
* 7
Configure Ethernet parameters
In standby (as from set version R5.3)
* *
Restarting the set
After power up, followed by
to
validate
* 9
Return to the default IP configuration (total
DHCP, disappearance of subscriber’s
number).
