AMT/PTD/TR/0001/3/7/EN
Installation Manual for digital sets - IP sets - SIP sets
Page
10-26 05/2008
Aastra Phone 312
10.6.1.5 Modifying profiles
Remark about the DHCP server
It is possible to configure the handset in such a way that, in addition to the IP configuration, the
telephony accounts (see "Configuring the SIP server”, p. 27) must be sent by DHCP. If a DHCP
server sends an IP configuration without any account, the handset ignores the DHCP information
and waits for the accounts.
In this case, DHCP flashes continuously, on the top left corner of the screen. It is either the DHCP
server must be configured in such a way that it sends the accounts (see "Supported DHCP
options", p. 31), or an access must be configured manually on the handset.
Press .
Select
, then confirm by pressing
.
Select any of the following menu points then confirm by pressing
.
Select any of the following menu points then confirm by
pressing .
Select any of the represented profiles then confirm by
pressing .
The currently active profile is indicated b a
tick .
Select any of the profiles on the list then
confirm by pressing
.
The handset tries to register with the
corresponding WLAN.
Select any of the profiles on the list then
confirm by pressing
.
Enter the administrator’s secret code (by
default 22222). You can modify the entries
for this profile (for more details, see New).
Select any of the profiles on the list then
confirm by pressing
.
Enter the administrator’s secret code (by
default 22222). The profile is deleted
immediately.
System
Network
Profiles
Select
Edit
Delete
