Q00180 Rev B
Page 94 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
be preconfigured for the user's networking environment – SSID, channel, encryption, and correct
addressing scheme (DHCP/static).
Static IP addressing is required in order to be able to display the additional wireless status. When
power is applied to a correctly configured
Quatech AirborneDirect
device that is connected to the
Ethernet port on the ZONARE system, it will require 30 to 60 seconds to detect and then associate
with the user's wireless network. Once a wireless network connection is established, the ZONARE
system will reflect the connection state by showing the network ICON on screen, in an uncrossed
state.
The configuration of the
Wireless Bridge
is done on the
Network
configuration screen. The source
information required for wireless device configuration on the
Z.ONEULTRA SP
, is the static
IP
Address
assigned (by the IT Administrator at the install site) to the
Quatech AirborneDirect
device
and the
Username
and
Password
for the CLI interface (default is
dpac
for both).
For assistance with the configuration of the local network settings on the
Z.ONEULTRA SP
,, to
support that aspect of a wireless network installation, contact Zonare Technical Support.
Содержание Z.one Ultra SP
Страница 1: ......