ZONARE Z.one Ultra SP, Руководство по обслуживанию, Страница: 125 / 244

Q00180 Rev B Page 125 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
3 JOG Dial (menu control)
4 CONTRAST
5 BRIGHTNESS
6 RECEIVING (indicates active print data transfer)
7 FEED (one-time push feeds paper, or holding during print cancels job)
8 COPY (prints another copy of previously transferred image)
9 OPEN (one-time push opens paper door, or holding during print cancels job)
10 CUT (cuts paper after image is printed)
15.3.5 Print Verification:
STEPS:
1. Power on the Cart, and the UP-D897, and connect a transducer.
2.
FREEZE the image. Verify a printed image is produced when the “ Print ” key on the
Scan Engine is depressed.
NOTE: Refer to the SONY UP-D897 Operators Manual, for detailed information on proper
operation of this device.
15.3.6 Printer Status Message Decoding:
SONY UP-D897:
Message Status Action
DOOR - The paper door is open - Close paper door until it is locked securely
EMPTY - Out of paper - Add paper
COOL - Print head thermal limit reached - Allow the printer to cool. Normal printing will
resume when message disappears, and thermal
print head has cooled.
WAIT - Printer is busy - Wait of internal processing to complete