Q00180 Rev B
Page 193 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
9.
Remove the two p-clamps and ty-wrap securing the cable bundle within the center column.
10.
To remove the display cable from the netted stretch shielding through which it is routed (with
other system cables) slide the netted stretch shielding together down its length, to cause the
shielding to expand in diameter sufficiently to slide the Main Board end connectors out of the
shielding.
11.
Pay special attention to the routing (looping) and retention (cable tie) of the display cable, within
the upper area of the main column of the SmartCart SP, in order to reproduce this layout during re-
assembly.
Display Removal:
STEPS:
1.
Remove the four (4) Phillips-head screws that are retaining the plastic display hinge back
cover, and remove cover and insert.
2.
Remove the (6) Phillips-head screws that are retaining the plastic display hinge back cover,
and remove cover and insert.
Содержание Z.one Ultra SP
Страница 1: ......