ZONARE Z.one Ultra SP, Руководство по обслуживанию, Страница: 126 / 244

Q00180 Rev B Page 126 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
15.4 SONY UP-D23MD Color Printer
15.4.1 Installation Notes:
SPECIAL NOTE
The Sony UP-D23MD Color Printer is oversize and is therefore not a peripheral that can
be “mounted” within the chassis of the
Z.ONEULTRA SP
. A separate external location
(rolling cart, tabletop, etc) must be made available for storing of this printer.
The system software on the
Z.ONEULTRA SP
system contains the necessary drivers to support
operation and printing to the Sony UP-D23MD Color Printer.
The information provided below covers the basic menu setup on the
Z.ONEULTRA SP
, to enable
printing to this device.
15.4.2 Setup Procedure:
STEPS:
1. Identify the dedicated work area, within reach of the
Z.ONEULTRA SP
, for placement of the
Sony UP-D23MD printer and setup the printer in that location.
2. Power off the Scanner and Cart.
3. Attach the USB cable between the Sony UP-D23MD Color Printer and one of the USB ports
on the rear of the
Z.ONEULTRA SP
.
4. Connect the AC power cable to the rear panel power plug of the UP-D23MD labeled “AC IN.”
5. Apply power to the system and printer.
6. Under the ARCHIVE -> DICOM -> PRINTERS page, create a new “ Local/USB ” type
printer entry for the Sony UP-23MD printer
7. Enter in “ Sony UP-D23MD ” to the Nick Name field of the printer configuration page
8. Enter in the desired printer settings, from those offered in the on-screen menu, and then select
“APPLY” to save.
9. Under the ARCHIVE -> STORE/PRINT page, configure the
Z.ONEULTRA SP
“ Print ”
button for triggering a print to the Sony UP-23MD printer.
3.
Connect a transducer to the
Z.ONEULTRA SP
. Wait for startup to complete and image to be
shown.
4.
Press the “FREEZE” key to capture an ultrasound image.