ZONARE Z.one Ultra SP, Руководство по обслуживанию, Страница: 84 / 244

Q00180 Rev B
Page 84 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
8.4 “DICOM” Configuration Procedure - Menus
NOTE :
Refer to the “Survey Form” (on the previous pages), for detailed information of all the
values that are offered in the
Z.ONEULTRA SP
menus, for selection within the various
fields, in each of the following configuration screens.
•
Site Specific ” LOCATION ” Configuration
The “ Location ” option supports cases where a User has a need to physically move their
Z.ONEULTRA SP
system from one facility (location) to another on a regular basis. This function
addresses cases where this movement includes connecting to a unique network at each location, for
sending to DICOM devices, and those network connections consist of different IP addresses and/or
target DICOM devices.
The “Location” feature allows for simultaneously having multiple configurations saved on the
Z.ONEULTRA SP
, and the ability to quickly toggle between those settings my merely changing
“Locations” in the menu. The parameters that are saved as a unique “Location” using this feature
are as listed below:
- System Setup->Archive->Network page settings (IP Address, Gateway, Netmask)
- System Setup->Archive->DICOM->General page settings (AE Title, etc)
- System Setup->Archive->DICOM->Worklist page settings ( Enabled server selection)
- System Setup->Archive->Store/Print page settings for devices using Print/Store buttons
- System Setup->Archive->Serial Port page settings (Calc report data via USB port)
1. To setup a new “Location”, first go to the setup pages listed above, and configure all of the
settings (IP Addresses, AE Titles, etc) applicable to the new site location.
2. Once all the Network/DICOM/Store-Print settings have been entered in these other menus,
perform the following steps to capture those settings as a new “Location”.
--------------------------------------------------------------------------------------------------------------------
3. Using the page MENU button to bring up the menu, then select the TOOLS menu
TOOLS Menu