Q00180 Rev B
Page 162 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
18.7
Display Monitor Adjustment – User Settings
18.7.1 SmartCart SP Display User Settings Adjustment
There are no local adjustment knobs on the LCD Display used on the SmartCart SP. The display
settings of the monitor are controlled remotely (via the DVI video cable connection), by an on-
screen Audio/Video control menu on the system.
To access the Audio/Video setup menu, use the “
Tab
” button and
Menu Control
on the user
interface, advance to the “
Tools
” menu
and then sequence through the following selection:
Tools
tab
--> SYSTEM SETUP --> DISPLAY --> AUDIO/VIDEO
The adjustable settings are:
•
Brightness
•
Contrast
•
Color Temperature (Red, Green, Blue)
Figure 47: SmartCart SP 19” Display: Recommended Settings
The adjustment of the video settings on the LCD Display, are accomplished by performing the
following steps.
1.
Power on the
Z.ONEULTRA SP
and allow it to fully boot
2.
Using the onscreen menus of the Scan Engine, select
Tools
|
System Setup
|
Display
|
Audio/Video
|, to access the audio/video configuration menu
3.
Using the trackball, place the cursor arrow to the desired position on the sliding bar scale (of
the desired display control), and press the
SET
key to mark the setting.
4.
Repeat the steps above for any additional display settings that are desired for change.
5.
To save the new settings and exit, select
Apply
from the menu, to save the configuration
and return to the Audio/Video menu.
Содержание Z.one Ultra SP
Страница 1: ......