Q00180 Rev B
Page 230 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
STEPS:
1.
Reverse all of the previous steps for installing the replacement gas spring, and re-installing the
power supply module.
System Verification:
STEPS:
1.
Reconnect the main AC power cord from the rear of the SmartCart SP or plug into the wall
source.
2.
Place AC circuit breaker, located at the rear of the SmartCart SP, in the “
1
” (ON) position.
3.
Operate the lift mechanism through its full range to ensure proper gas spring operation.
4.
Power on the SmartCart SP and perform a series of basic user operations, to verify normal
system functionality.
5.
Verification is complete – return system to normal operation.
20.3.12 DVD/CD Drive Replacement (SmartCart SP)
Required Parts
•
P/N 85136-00 Assy, DVD/CD Drive w/Connector
•
Small ty-wraps (3)
Required Tools/Equipment
•
#2 Phillips Screwdriver – Stubby
•
T10 Torx Screwdriver
•
Small flat blade screwdriver
Prerequisite Procedures to Be Performed:
•
Scanner Deck Removal
Overview of Procedure
•
Remove Scanner Deck (reference procedure elsewhere in this chapter)
•
Remove and replace DVD Drive
•
System Verification
DVD Drive Replacement:
Содержание Z.one Ultra SP
Страница 1: ......