Q00180 Rev B
Page 128 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
1.
Connect the AC power cord to the printer, and the other end to an active AC Power outlet
2.
Connect one end of the network crossover cable to the HP LaserJet printer, and the other end to
the Ethernet (RJ-45) port on the
Z.ONEULTRA SP
.
3.
Power on the HP LaserJet printer
4.
Open the paper tray on the printer, and install the desired paper.
5.
Power on the
Z.ONEULTRA SP
•
Report Printing Configuration – on
Z.ONEULTRA SP
In order to utilize this Report printing capability, it is necessary to pre-configure the Export/Print setup
parameters, within the “CALCS” sub-menu, as part of the System Setup operations. The following
steps and menus are used for the setup of this OB Report Exporting/Printing function.
STEPS:
6.
Go to the Printer/Export configuration screen, by selecting the following sequence:
System Setup -> Calc -> Export/Print
Printer/Export Configuration (Calc Reporting)
7.
To configure the system for printing of reports to the HP LaserJet , select the following:
•
Output Type (for applicable report type(s):............................
PRINT REPORT
•
Printer Destination: .................................................................
NETWORK PRINTER
•
Paper Size: .............................................................................
LETTER
•
Printer IP Address: Enter printer’s assigned IP (potentially 192.168.1.1)
Содержание Z.one Ultra SP
Страница 1: ......