ZONARE Z.one Ultra SP, Руководство по обслуживанию, Страница: 130 / 244

Q00180 Rev B Page 130 of 244
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
Network Configuration Page
14.
Using the arrow cursor and SET key, check the box for “ USE SPECIFIED ”
15.
In the data entry box to the right of the “ USE SPECIFIED ” checkbox, enter in an IP Address
that is one greater then the value of the HP LaserJet printer (i.e printer: 192.168.1.1 ,
Z.ONEULTRA SP
: 192.168.1.2 )
16.
Select “ APPLY ”, to save the settings
Printing Reports:
17.
Perform the desired calculations and measurements on the
Z.ONEULTRA SP
.
18.
At the conclusion of the measurement process, to manually trigger the print of an OB Report,
select the “
PRINT ” softkey, in the Calculations -> Report page
19.
IF the Report printing was configured for “Print at end of exam”, the Report will automatically
be output to the HP LaserJet, upon ending the current exam.